Clearing A Reading; Overwriting Readings - GE DMS Go+ Operating Manual

Saving measurement results

Clearing a reading

You can clear a stored reading at any time.
– In the function group DR, select one of the functions
ROW, COLUMN, ELEVATION, TUBE, or POINT,
depending on the file type.
– Press one of the left or right arrow keys in order to
select a data point with a stored reading. The marking
in the overview of measuring points at the top of the
display screen is moved.
– Press the center key of the keypad long. The func-
tions of the function keys change.
– Press the function key 3 (function CLEAR). The read-
ing is cleared.
N o t e
You can assign the clearing function CLEAR
together with the function OBSTR to the
function key 4 (see Section Assignment of
function key 4, page 5-7).
DMS Go+

Overwriting readings

By selecting a data point which already has a reading
assigned to it, you cannot normally overwrite the read-
ing saved there.
However, you can cancel this write protection if neces-
sary. In that case, the previously saved readings can be
overwritten at any time.
You have a choice between the following options:
● NO (overwriting is not possible)
● OLD (overwriting of old files)
● ALL (overwriting without confirmation)
● ASK (overwriting after confirmation)
– In the function group DR, select the function OVER-
WRITE.
– Choose the required option.
Edition 4 (05/2014)
6 Data Recorder
6-17