Disabling Vxlans - Cisco Nexus 7000 Series Configuration Manual

Disabling VXLANs

Step 7
The following example shows how to configure L3 interface on tenant bridge-domains/VNIs in L3 gateway:
feature interface-vlan
interface bridge-domain 100
feature interface-vlan
interface bridge-domain 200
Disabling VXLANs
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco Nexus 7000 Series NX-OS VXLAN Configuration Guide
28
Command or Action
ip address address
ip address 50.1.1.2/24
vrf member tenant
hsrp 50
ip address 50.1.1.1
ip address 60.1.1.2/24
vrf member tenant
hsrp 60
ip address 60.1.1.1
Command or Action
configure terminal
no feature vni
no feature nv overlay
no bridge-domain
no member vni
no vni
copy running-config
startup-config
Configuring VXLAN Flood and Learn
Purpose
Configures the virtual IP address for the HSRP group
and enables the group.
Repeat steps 1-5 to configure another bridge-domain
interface and HSRP.
Purpose
Enters configuration mode.
Disables the global mode for all VXLAN bridge domains
Disables the VXLAN feature.
Disables bridging to map VLAN.
Dissociates VXLAN VNIs from the NVE interface.
Removes the VXLAN segment ID to which the VLAN
is mapped.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.