Configuring VXLAN BGP EVPN
Performing End Host Detection, Deletion and Move
Performing End Host Detection, Deletion and Move
End host detection by a VTEP device
Figure 13: End Host Detection
When a new end host (Host A) is attached to VTEP V1, the following actions occur:
1 VTEP V1 learns Host A's MAC and IP address (MAC_A and IP_A).
2 V1 advertises MAC_A and IP_A to the other VTEPs V2 and V3 through the route reflector.
3 The choice of encapsulation (VXLAN) is also advertised.
Cisco Nexus 7000 Series NX-OS VXLAN Configuration Guide
52