Ec Declaration Of Conformity - Makita DVC860L Instruction Manuals

Only for EU countries
Ni-MH
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
and Waste Batteries and Accumulators
and their implementation in accordance
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for collecting both wet and dry dust.
The tool is suitable for commercial use, for example in
rental businesses.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
Wear ear protection
Vibration
For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):
Corded and Cordless Vacuum Cleaner
Conforms to the following European Directives:
They are manufactured in accordance with the following
pA
or less
h
Director
CORDED AND CORDLESS VACUUM
CLEANER SAFETY WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
1. Before use, make sure that this cleaner must
be used by people who have been adequately
instructed on the use of this cleaner.
If foam/liquid comes out, switch off
immediately.
Clean the water level limiting device regularly
and examine it for signs of damage.
USE OF EXTENSION CORD. When using an
extension cord because of the great distance
to your power source, try to employ a cord that
performance will be adversely affected. For
outdoor applications use an extension cord
suitable for outdoor use.
6. VOLTAGE WARNING: Before connecting the
cleaner to a power source (receptacle, outlet,
etc.) be sure the voltage supplied is the same
cleaner. A power source with voltage greater
in SERIOUS INJURY to the operator as well
as damage to the cleaner. If in doubt, DO NOT
PLUG IN THE CLEANER. Using a power source
with voltage less than the nameplate rating is
-
harmful to the motor.
7. AVOID UNINTENTIONAL STARTING. Be sure
switch is OFF when plugging in.
8.
metal chips, sharp materials such as razors,
needles, broken glass or the like.
9. NEVER USE THE CLEANER IN THE VICINITY
OF GASOLINE, GAS, PAINT, ADHESIVES OR
OTHER HIGHLY EXPLOSIVE SUBSTANCES.
The switch emits sparks when turned ON
and OFF. And so does the motor commutator
during operation. A dangerous explosion may
result.
10. Never vacuum up toxic, carcinogenic, com-
bustible or other hazardous materials such
as asbestos, arsenic, barium, beryllium,
lead, pesticides, or other health endangering
materials.
11. Never use the cleaner outdoors in the rain.
Do not use close to heat sources (stoves, etc.).
GUARD AGAINST ELECTRIC SHOCK. Prevent
body contact with grounded surfaces. For
example; pipes, radiators, ranges, refrigerator
enclosures.
Do not block cooling vents. These vents per-
mit cooling of the motor. Blockage should be
carefully avoided otherwise the motor will burn
out from lack of ventilation.
Keep proper footing and balance at all times.
3 ENGLISH