Upc A; Upc A Check Digit; Upc A Number System; Upc A Addenda - Honeywell 3200 User Manual

UPC A

UPC A
* On

UPC A Check Digit

This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
* On

UPC A Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On

UPC A Addenda

6 - 16
<Default All UPC A Settings>
Off
Off
Off
3200 User's Guide