Table of Contents
Advertisement
No Check Character indicates that the imager reads and transmits barcode
data with or without a check character.
When Check Character is set to Validate and Transmit , the imager will only
read Codabar barcodes printed with a check character, and will transmit this
character at the end of the scanned data.
When Check Character is set to Validate, but Don't Transmit , the unit will only
read Codabar barcodes printed with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16 and Transmit
Codabar Message Length
Scan the barcodes below to change the message length. Refer to
Message
Length
on page 6-1 for additional information. Minimum and Maximum
lengths = 2-60. Minimum Default = 4, Maximum Default = 60.
Minimum Message Length
Maximum Message Length
3200 User's Guide
6 - 3
Hide quick links:
Advertisement
Table of Contents
