Automatic Trigger; Reread Delay - Honeywell 3200 User Manual

Automatic Trigger

The imager scans continuously at full power with illumination fully on.

Reread Delay

This sets the time period before the imager can read the same barcode a second
time. Setting a reread delay protects against accidental rereads of the same
barcode. Longer delays are effective in minimizing accidental rereads at POS
(point of sale). Use shorter delays in applications where repetitive barcode
scanning is required. Default = Medium.
Reread Delay only works when in automatic trigger mode or presentation mode
(see page 3-2).
Short (500 ms)
Long (1000 ms)
3 - 2
Automatic Trigger
* Medium (750 ms)
Extra Long (2000 ms)
3200 User's Guide