Controller Specifications - Panasonic HL-C2 Series User Manual

Chapter 8 Specifications
8-1

Controller Specifications

● RS-232C type
Model No.
Supply voltage
Current
consumption
Sampling cycle
Voltage
Analog
output
Current
Alarm output
Output operation
Short circuit protection
Judgment output
(HI, GO, LO）
8
Output operation
Short circuit protection
Strobe output
Output operation
Short circuit protection
HL-C2C(E)
24VDC ±10% Including ripple 0.5V (P-P)
Approx. 500mA at 2 sensor heads connected
Approx. 350mA at 1 sensor head connected
(Approx. 100mA is additionally required when the compact programmable display is connected.)
10µs, 20µs, 40µs, 100µs, 200µs, 400µs, 1ms, 2ms
Voltage output scale: -5 to +5V/F.S (initial value)
Output range during normal status: -10.0 to +10.0V
*1
Output at abnormal status: -10.8V or +10.8V
Resolution: 2mV, Linearity: ±0.05% F.S.
Max. 2mA, output impedance 50Ω, Response delay time: Approx. 1.5µs/V
Current output scale: 4 to 20mA/F.S (initial value)
Output range during normal status: 2 to 24mA
*2
Output at abnormal status: 1mA or 25mA
Resolution: 3mA, Linearity ±0.05% F.S.
Load impedance: 250Ωmax., Response delay time: Approx. 10
NPN transistor open collector
Maximum in-flow current: 100mA
Applied voltage: 3 to 30VDC
(ALARM output to Common(-))
Residual voltage: 1V or less
(at in-flow current of 100mA)
Leak current : 0.05mA or less
Open when the output is ON (Light intensity is insufficient).
NPN transistor open collector
Maximum in-flow current: 100mA
Applied voltage: 3 to 30VDC
(Judgment output to Common(-))
Residual voltage: 1V or less
(at in-flow current of 100mA)
Leak current : 0.05mA or less
Open when the output is ON(output operates).
NPN transistor open collector
Maximum in-flow current: 100mA
Applied voltage: 3 to 30VDC
(Strobe output to Common(-))
Residual voltage: 1V or less
(at in-flow current of 100mA)
Leak current : 0.05mA or less
Open when the output is ON(data is determined).
PNP transistor open collector
Maximum out-flow current: 100mA
Applied voltage: 3 to 30VDC
Residual voltage: 1V or less
(at out-flow current of 100mA)
Leak current : 0.05mA or less
Incorporated (Auto-reset)
PNP transistor open collector
Maximum out-flow current: 100mA
Applied voltage: 3 to 30VDC
Residual voltage: 1V or less
(at out-flow current of 100mA)
Leak current : 0.05mA or less
Incorporated (Auto-reset)
PNP transistor open collector
Maximum out-flow current: 100mA
Applied voltage: 3 to 30VDC
Residual voltage: 1V or less
(at out-flow current of 100mA)
Leak current : 0.05mA or less
Incorporated (Auto-reset)
8-2
HL-C2C(E)-P
µs
(ALARM output to +V)
(Judgment output to +V)
(Strobe output to +V)