Communication: Com Port - Panasonic HL-C2 Series User Manual

■ Communication: COM Port

This function specifies the baud rate, the data length, and parity for
RS-232C communication.
These settings are used for communication with PC using RS-232C connector.
Make sure to save the changed setting values, and then restart the power supply of
the controller to validate the settings.
Setting item
Sets the communication speed.
Baud rate
Select from 9,600bps/19,200bps/38,400bps/115,200bps.
Sets the data bit number.
Data length
Select from 7bit/8bit.
Sets the check bit for securing the reliability of communication.
Parity
Select from even/odd/none.
For more further detail of RS-232C communication, refer to
Communication Control".
● How to use
1
Display the "Communication: COM Port" screen.
Baud Rate setting
2
Touch the "Baud Rate" key to select the
communication speed.
The display is changed as below each time the
key is touched.
115,200bps
Data length setting
2
Touch the "Data Length" key to select the
data length.
The display is changed between
7 （ 7bit ） each time the key is touched.
Parity Setting
2
Touch the "Parity" key to select the parity
setting.
The display is changed as below each time the
key is touched.
None Even
9,600bps 19,200bps
8 （ 8bit ） and
Odd
4-69
Chapter 4 Explanation of Functions
Details
"5-1 RS-232C
38,400bps
4