Initialization - Panasonic HL-C2 Series User Manual

Chapter 4 Explanation of Functions

■ Initialization

This function deletes all setting contents in the memory and initializes the
settings again.
If the initialization is not saved, the system operates with the previous settings at
the next start-up.
Initialize All
Note that the initialized setting contents are deleted at the next start-up if the
initialized setting contents are not saved.
Refer to
When the initialization is executed, the data unfixed status may occur temporarily.
At data unfixed state, the strobe output is set to "OFF", and after the data become
4
fixed, the strobe output is set to "ON" and the measurement data display is started.
● How to use
In case of initializing the memory setting in current use
1
2
3
Touch the
4
Setting
Initialize Initializes the settings other than the common memory settings.
Initializes the all settings including the common memory settings.
Memory
"Save".
Display the "Initialize" screen.
Touch the Initialize
The confirmation message appears.
key.
Yes
The message of notifying the completion of
initialization appears.
*Touch the No key to cancel the
initialization and return to step 1.
Touch the OK key.
Touch the OK key to return to the "System
Menu 1/2".
Function
key.
4-66