Parts Description - Makita DVC863L Instruction Manual

work need.
Suction power can be increased by turning the suc-
the symbol.
NOTICE:
side when not using the cleaner for long time. The
cleaner consumes power during stand-by state.
Auto-suction stop during wet
suction operation
WARNING:
Do not use for a long time while
work for a long time can cause overheat, resulting in
the cleaner deformation.
WARNING:
Do not pick up foam or soapy
liquid.
Continuing to using in this condition may cause an
electric shock and breakage of the cleaner.
from immersing into the motor when picking up more
than a certain amount of water. When the tank is full
and the cleaner no longer picks up water, switch off the
cleaner and empty the tank.
Locking or unlocking the caster
1
1. Caster 2. Stopper lever 3.
4.
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
To lock the caster with a stopper, lower the stopper
lever and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
NOTE: When moving the cleaner, make sure that
the caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage to
the caster.
symbol to
3
4
2
Carriage handle
When carrying the cleaner, carry it by holding the han-
dle on the head. The handle is retractable at the head
when not in use.

PARTS DESCRIPTION

Model DVC862L
1. Tank cover 2.
5. Tank
7 ENGLISH
1
2
3
4
5
3. 4.