Chapter 1. Program Reset And Srv Mode - Sharp UP-3301 Programming Manual

CHAPTER 1. PROGRAM RESET and SRV mode

In the UP-3301, the following reset switch (location No: S1) is used to
enter to the service (SRV) mode and to reset.
PROGRAM RESET
Required to return the machine back to its operation state after a lock
up has occured.
PROCEDURE
1) Turn off the AC switch.
2) Set the reset switch to the "ON" position.
3) Turn on the AC power switch.
4) Set the reset switch to the "OFF" position.
5) The reset menu window is displayed as shown below.
DISPLAY:
Please select
PROGRAM RESET
Touch the [PROGRAM RESET] key.
6) PROGRAM RESET is executed.
MRS Switch MRS Switch
ON OFF
Rear view
MASTER RESET
UP-3301UP PROGRAM RESET and SRV mode
7) After completion of the program reset, the SRV mode is displayed
as shown below.
DISPLAY:
[SRV mode screen]
– 1 –