Cisco 10005 ESR Manual page 26

Removing and Replacing Field-Replaceable Units
Remove the PCMCIA card from the PRE (see the
Step 4
PCMCIA Flash Memory Card" section on page
Unscrew the left and right captive screws on the PRE
Step 5
Figure 3-15 Loosening the Captive Screws
Captive
screw
Simultaneously pivot both ejector levers away from each other to disengage the
Step 6
PRE from the midplane.
Slide the PRE out of the slot
Step 7
in an antistatic bag.
Cisco 10005 ESR Hardware Overview and Maintenance Guide
3-26
Ejector
Ejector
lever
lever
Chapter 3
"Removing and Installing a
3-28).
OC -12
/ST M- 4
PO S SM
-IR
OC -12
/ST M- 4
PO S SM
-IR
6X CT 3–
DS 0
6X CT 3–
DS 0
OC -12
/ST M- 4
AT M SM
-IR
Captive
screw
(Figure 3-16) and place it on an antistatic surface or
Maintaining the Cisco 10005 ESR
(Figure 3-15).
OL-1102-07