Primary Labor Parameters; Fhr Display - GE Corometrics 126 Service Manual

Primary Labor Parameters

Revision B
Controls, Indicators, and Connectors: Front Panel Displays
The primary labor parameters section displays FHR1, FHR2, and UA data.

FHR Display

The FHR1 and FHR 2 areas are summarized by
Table 3-3.
B
A
Name
A FHR Value
FHR Alarm Setting
B
Indicator
C FHR Mode Title
D FHR Heartbeat Indicator
120 Series Maternal/Fetal Monitor
2015590-001
Figure 3-4
C
FECG
165
Figure 3-4. FHR Display
Table 3-3. FHR Display
Description
Up to three digits indicate the fetal heart rate in
beats per minute.
This symbol provides information about the FHR
audio alarm and the FHR high/low alarm limit
settings.
: An alarm setting is turned off.
: All alarm settings are enabled.
An abbreviation indicates the monitoring mode in
use: , , , or
FECG US US2 INOP
in the FHR1 area.) Select the mode softkey to
access the respective setup screen. See
for FHR connection options.
Flashes with each detected valid heartbeat.
and
D
. ( only displays
FECG
Table 3-4
3-7