Cleaning
Cleaning the Monitor Exterior
Cleaning the Electroluminescent Panel
9-2
General Maintenance: Cleaning
The following cleaning instructions are provided. If an accessory is not listed,
consult the manufacturer's instructions.
1.
Wipe any fluids from the surface of the monitor.
2.
Dampen a cloth or paper towel with isopropyl alcohol and gently rub soiled area
until clean.
1.
Dampen a soft cloth with water. The cloth should be free of grit or other
particles that may cause abrasion.
CAUTION
CLEANING AGENTS—Do not use isopropyl alcohol.
2.
Rub lightly in a circular motion.
120 Series Maternal/Fetal Monitor
2015590-001
Revision B