Ggsn_Apn Id Mapping - Cisco ASR 5000 Series Administration Manual

GGSN_APN ID MAPPING

GGSN_APN ID MAPPING
This macro-checkpoint is sent from the active to the standby chassis to map APN names on the standby chassis.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Occurs whenever a TCP connection is established between the sessmgrs and they move to
• Accounting: No
• Delta/Cumulative: N/A
• Related CLI command: show session subsystem facility sessmgr instance <instance no> debug-info
INSTANCE LEVEL CHECKPOINT
This macro-checkpoint is generated by ECS (Enhanced Charging System) to send new rules to the standby
chassis. It is also used by ECS to delete or modify a rule on the standby chassis.
• Time based: Yes
• Frequency: 30 minutes
• Event based: Yes
• Events: Occurs:
• Accounting: —
• Delta/Cumulative: —
• Related CLI command: show session subsystem facility sessmgr instance <instance no> debug-info
SERVICE_ID MAPPING
This macro-checkpoint is sent from the active to the standby chassis to map Service IDs on the standby chassis.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Occurs whenever a TCP connection is established between the sessmgrs and they move to
ASR 5500 System Administration Guide, StarOS Release 21.4
436
READY_STATE.
and show srp micro-checkpoint statistics
1 When a new rule is added or deleted on the active chassis.
2 Every 30 minutes if the ECS is registered for periodic micro-checkpointing.
and show srp micro-checkpoint statistics
READY_STATE.
ICSR Checkpointing