Verifying The Configuration - Cisco ASR 5000 Series Administration Manual

NETCONF and ConfD
#exit
end
Notes:
• bulkstats, confd-user, and rest are optional. Just configuring server confd enables NETCONF support.

Verifying the Configuration

There are two Exec mode show commands that display information about the NETCONF-ConfD configuration.
show confdmgr Command
This command displays information about the StarOS ConfD Manager (confdmgr) process.
The syntax for this command is:
show confdmgr [ confd { cdb | netconf | state } | model { bulkstats | confd } | subscriptions ] [ | { grep
grep_options | more } ]
Notes:
• The confd keyword displays information about the ConfD engine based on the specified keyword in
• The model keyword displays information about the ConfD model based on the specified keyword in
• The subscriptions keyword displays ConfD CDB subscription information.
show confdmgr
See below for a sample output for show confdmgr:
[local]<host_name># show confdmgr
State Information
-----------------
State
bulkstats
confd-user NETCONF
rest certificate rest-cert
#exit
subscriber default
exit
aaa group default
#exit
gtpp group default
#exit
the following options:
◦ cdb displays ConfD CDB information
◦ netconf displays NETCONF state information
◦ state displays current ConfD state information
the following options:
◦ bulkstats bulk statistics configuration and operational data
◦ confd server ConfD configuration
Started
ASR 5500 System Administration Guide, StarOS Release 21.4
Verifying the Configuration
417