Makita JV102D Instruction Manual page 3

SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
power tool. Failure to follow all instructions listed below
tions for future reference.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
tools.
reduce risk of electric shock.
2.
refrigerators.
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
increase the risk of electric shock.
5.
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
the risk of electric shock.
7.
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal Safety
1.
moment of inattention while operating power tools
Damaged or entangled cords
Use of an RCD reduces
However,
2.
wear eye protection.
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
3.
to power source and/or battery pack, picking
that have the switch on invites accidents.
-
4.
attached to a rotating part of the power tool may
5.
balance at all times.
of the power tool in unexpected situations.
6.
-
long hair can be caught in moving parts.
7.
dust extraction and collection facilities, ensure
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
Power tool use and care
1.
power tool for your application.
rate for which it was designed.
-
2.
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3.
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4.
hands of untrained users.
5.
are caused by poorly maintained power tools.
6.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7.
A
for operations different from those intended could
result in a hazardous situation.
3 ENGLISH
Carrying power tools with
A wrench or a key left
Power tools are dangerous in the
Many accidents
Properly
Use of the power tool
Use of
-
-
-
-