Table of Contents
Advertisement
ASC02-01WM
EN2B-0365GE51 R0710
2.2
Improper usage
The controller must not be operated in the following environments:
•
outdoors
•
in damp rooms
•
in rooms where highly flammable gas mixtures can occur
•
in rooms in which the operation of electrical and electronic
components may cause dangers to arise
2.3
Dangers during assembly / commissioning
The following dangers exist during assembly / commissioning of
the controller and during operation (in case of assembly errors):
•
Risk of death by electrocution
•
Risk of fire due to short-circuit
•
Damage to any of the constructional fire safety measures
present in the building due to incorrectly installed cables
•
Damage to the controller and connected devices due to
improper ambient conditions, inappropriate power supply and
connecting prohibited devices or faulty devices and incorrect
assembly or installation
Therefore, all safety regulations apply when working on the mains
supply. Only electricians may perform work that requires opening
the controller (such as connection work).
► When laying cables, ensure that no damage occurs to any of
the constructional fire safety measures present in the building
► Make sure that the permissible ambient conditions at the
installation site are not exceeded (see chapter 12).
► Make sure to comply with the specified degree of protection.
► Factory labels and markings may not be altered, removed or
rendered unreadable.
► Before connecting the device, make sure that the power
supply matches the specifications on the type plate.
Safety
.
9
Advertisement
Table of Contents
