Table of Contents
Advertisement
Installation
4.1.2
4.2.1
14
Closing the case
► Place the upper case over the lower case at an angle. Insert
the clips in the pocket of the lower case.
► Pivot the upper case down and feed the operating buttons
through the matching holes.
► Fasten the case tightly with the screw.
4.2
Mounting
WARNING
Risk of electric shock and fire if assembled in a damp
environment!
► Only assemble the controller in an area where the degree of
protection is sufficient.
Mounting the controller
3
CAUTION
Risk of injury and damage to the case when drilling!
► Do not use the case as a drilling template.
1
116
134
EN2B-0365GE51 R0710
ASC02-01WM
2
Advertisement
Table of Contents
