Table of Contents
Advertisement
Safety
10
► Make sure that all devices which are connected to the
controller conform to the technical specifications of the
controller.
► Secure the device against unintentional commissioning.
► All work on an open controller must be performed with the
mains supply disconnected.
► Protect the controller against overloading and short-circuiting.
2.4
Detecting faults
► Check the display regularly.
► In case of faults, isolate the cause (see chapter 9).
► As soon as it becomes evident that safe operation is no longer
possible (e.g. visible damage), remove the device from the
mains supply immediately.
► Have professional personnel remedy the fault.
2.5
Exclusion of liability
The manufacturer cannot monitor the compliance to this manual
as well as the conditions and methods during the installation,
operation, usage and maintenance of the controller. Improper
installation of the system may result in damage to property and,
as a result, in bodily injury.
Therefore, we assume no responsibility and liability for loss,
damage or costs which result from or are in any way related to
incorrect installation, improper operation, incorrect execution of
installation work and incorrect usage and maintenance.
Similarly, we assume no responsibility for patent right or other
right infringements of third parties caused by usage of this
controller.
The manufacturer reserves the right to make changes to the
product, technical data or assembly and operating instructions
without prior notice.
ASC02-01WM
EN2B-0365GE51 R0710
Advertisement
Table of Contents
