Cisco ASR 14000 Series Command Reference Manual page 25

Bidirectional Forwarding Detection Commands on Cisco IOS XR Software
show bfd counters
To display Bidirectional Forwarding Detection (BFD) counter information, use the show bfd counters
command in EXEC mode.
Syntax Description ipv4
ipv6
all
packet
interface
type
interface-path-id
location node-id
Defaults The default is the default address family identifier (AFI) that is set by the set default-afi command, IPv4
or IPv6.
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
bgp
ospf
isis
mpls-te
OL-17228-01
show bfd counters [ipv4 | ipv6 | all] packet [interface type interface-path-id] location node-id
(Optional) Displays BFD over IPv4 information only.
(Optional) Displays BFD over IPv6 information only.
(Optional) Displays both BFD over IPv4 and BFD over IPv6 information.
Specifies that packet counters are displayed.
(Optional) Specifies the interface for which to show counters.
(Optional) Interface type. For more information, use the question mark (?)
online help function.
(Optional) Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Displays BFD counters from the specified location.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
read
read
read
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
show bfd counters
HR-21