Cisco ASR 14000 Series Command Reference Manual page 13

Bidirectional Forwarding Detection Commands on Cisco IOS XR Software
bfd multiplier
To set the Bidirectional Forwarding Detection (BFD) multiplier, use the bfd multiplier command in the
appropriate configuration mode. To return the router to the default setting, use the no form of this
command.
Syntax Description
multiplier
Defaults multiplier = 3
Command Modes BGP configuration mode
Router configuration
IS-IS configuration mode
Interface configuration
MPLS-TE configuration mode
MPLS-TE configuration
OSPF router configuration mode
Router configuration
Interface configuration
Area configuration
Router PIM interface configuration mode
Command History. Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
OL-17228-01
bfd multiplier multiplier
no bfd multiplier
Number of times a packets is missed before BFD declares the neighbor down.
The following ranges are listed:
• BGP—2 to 16
IS-IS—2 to 50
•
• MPLS-TE—2 to 10
OSPF—2 to 50
•
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
bfd multiplier
HR-9