Cisco ASR 14000 Series Command Reference Manual page 160

show bundle Bundle-POS
show bundle Bundle-POS
To display information about a specific POS bundle, use the show bundle Bundle-POS command in
EXEC mode.
Syntax Description bundle-id
reasons
Defaults
No default behavior or values
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
bundle
Examples The following sample output is from the show bundle Bundle-POS command:
RP/0/RP0/CPU0:router# show bundle Bundle-POS 5
State: 0 - Port is Detached. 1 - Port is Waiting.
Bundle-POS5
B/W (Kbps)
----------
Port
------------
PO0/0/0/0
PO0/0/0/1
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
HR-156
show bundle Bundle-POS bundle-id [reasons]
Number of the POS bundle whose information you want to display. Replace
bundle-id with a bundle identifier. Range is from 1 through 65535.
(Optional) Displays the "Mux Reason", which is the reason why each link is
in its state.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
2 - Port is Attached. 3 - Port is Collecting.
4 - Port is Distributing.
MAC address
--------------
0 N/A
State Port ID
----- --------------
0 0x8000, 0x0001
0 0x8000, 0x0002
Link Bundling Commands on Cisco IOS XR Software
Minimum active Maximum active
Links B/W (Kbps) Links
----- ---------- -----
1 1 32
B/W (Kbps) MAC address
---------- ---------------
155520 N/A
155520 N/A
OL-17228-01