Cisco ASR 14000 Series Command Reference Manual page 214

show flow monitor
show flow monitor
To display flow monitor cache data in various formats, use the show flow monitor command in EXEC
mode.
To match on access control lists (ACLs) and one or more fields:
To sort flow record information according to a particular field:
To include or exclude one or more fields in the show flow monitor command output:
To display summarized flow record statistics:
To display only key field, packet, and byte information for the flow records:
To display flow record information for a particular node only:
Syntax Description
If you specified the show flow monitor monitor-name cache match command to match on ACL and one
or more fields:
monitor-name
cache
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
HR-210
show flow monitor monitor-name cache match {ipv4 {acl name | source-address match-options |
destination-address match-options | protocol match-options | tos match-options} | ipv6 {acl
name | source-address match-options | destination-address match-options | protocol
match-options | tc match-options} | layer4 {source-port-overloaded match-options |
destination-port-overloaded match-options | tcp-flags match-flags-options}| bgp {source-as
match-options | destination-as match-options} | interface {ingress match-if-options | egress
match-if-options} | timestamp {first match-options | last match-options} | counters {byte
match-options | packets match-options} | misc {forwarding-status match-options | direction
match-dir-options}}
show flow monitor monitor-name cache sort {ipv4 {source-address | destination-address | tos |
protocol} | ipv4 {source-address | destination-address | tc | protocol} | mpls {label-2 |
label-3 | label-4| label-5 | label-6 | label-type | prefix | top-label}| layer4
{source-port-overloaded | destination-port-overloaded} | bgp {source-as | destination-as}
| interface {ingress | egress} | timestamp {first | last} | counters {bytes | packets} | misc
{forwarding-status | direction} {top | bottom} [entries]}
show flow monitor monitor-name cache {include | exclude} {ipv4 {source-address |
destination-address | tos| protocol} | {ipv6 {source-address | destination-address | tc |
flow-label | option-headers | protocol} | mpls {label-2 | label-3 | label-4| label-5 | label-6 |
top-label} | layer4 {source-port-overloaded | destination-port-overloaded} | bgp
{source-as | destination-as} | interface {ingress | egress} | timestamp {first | last} | counters
{bytes | packets} | misc {forwarding-status match-options | direction match-dir-options})
show flow monitor monitor-name cache summary
show flow monitor monitor-name cache brief
show flow monitor monitor-name cache location node-id
Flow monitor map whose details you want to display.
Displays details about the flow monitor cache.
NetFlow Commands on Cisco IOS XR Software
OL-17228-01