Cisco ASR 14000 Series Command Reference Manual page 235

NetFlow Commands on Cisco IOS XR Software
show flow platform producer statistics location
To display statistics collected by the NetFlow producer, use the show flow platform producer statistics
location command in EXEC mode.
Syntax Description node-id
Defaults
No default behavior or values
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Task ID Task ID
netflow
Examples The following sample output shows the statistics that are collected by the NetFlow producer for the CPU
card in slot 0:
RP/0/RP0/CPU0:router# show flow platform producer statistics location 0/0/CPU0
Netflow Platform Producer Counters:
IPv4 Ingress Packets:
IPv4 Egress Packets:
IPv6 Ingress Packets:
IPv6 Egress Packets:
MPLS Ingress Packets:
MPLS Egress Packets:
Drops (no space):
Drops (other):
Unknown Ingress Packets:
Unknown Egress Packets:
Worker waiting:
OL-17228-01
show flow platform producer statistics location node-id
Location of the node whose NetFlow producer statistics you want to
display.
Note
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Cisco ASR 14000 Series Router Interface and Hardware Component Command Reference
show flow platform producer statistics location
Use the show platform command to see the location of all nodes
installed in the router.
0
0
0
0
0
0
0
0
0
0
0
HR-231