Advertisement
R
epair
(7) Assembling gear section
1. Assemble gear section as illustrated in Fig. 18.
< Note > Do not fasten the parts with the used adhesive hex socket bolt M10x18.
Always use the fresh adhesive one.
Ball bearing
6201LLB
Gear shaft
Ball bearing
6001LLB
2. Assemble the gear section to gear housing with aligning the concave portion of bearing retainer 58 with the
edge of bearing setting hole of gear housing. See Fig. 19.
Apply 12g of MAKITA grease N.No.1
to gear complete.
3. Assemble the gear section to gear housing with aligning the concave portion of bearing retainer 58 with the
edge of bearing setting hole of gear housing. See Fig. 19A.
< Note > Do not fasten the parts with the used adhesive countersunk head screws M5x12 and hex socket
head bolt M6x18. Always use fresh adhesive ones.
Apply a bit of MAKITA grease N.No.1 to crank shaft, counter weight and plate
Countersunk head
screws M5x12
Hex socket head
bolt M10x18
Gear complete
Ring 15
Bearing retainer 58
Fig. 18
Guide plate
Gear housing
Fig. 19A.
Concave portion of
bearing retainer 58
Bearing
retainer 58
Fig. 19
Needle bearing 708
Crank shaft
Ring 21
Counter weight
Plate
Gear housing
P 11 / 15
Fastening torque for
hex socket head bolt M10x18
is 15 - 20N.m.
Edge of bearing setting
hole of gear housing
Fastening torque for
hex socket head bolt M6x18
is 10 - 15N.m.
Advertisement
