Maintenance And Storage - Makita HW1300 Instruction Manual

1
► 1 . Catch 2. Handle
NOTICE:
To prevent the high-pressure hose from
being damaged, remove the remaining water in
the hose before storing.
MAINTENANCE &
STORAGE
CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning the nozzle
Use the cleaner pin to remove dirt from or unclog the
nozzle.
1
► 1 . Cleaner pin
NOTICE:
Do not remove dirt or debris forcibly.
This may result in personal injury or damage to the
ejection hole causing deviated jet angles or poor
performance.
Cleaning the ilter
Detach the water hose connector and remove dirt and
debris from the inside of the ilter.
2
► 1 . Water hose connector 2. Filter 3. Sealing ring
When using the suction hose set (optional accessory),
take the ilter out of the ilter case and remove dirt and
debris.
1
► 1 . Filter 2. Filter case
NOTE: To maintain the optimal performance, clean
the ilter periodically.
Storage
Reel the hose and cord. Put the trigger gun and nozzles
in the pockets.
HW1200
12 ENGLISH
1
2
2
3