Operation - Makita HW1300 Instruction Manual

1
► 1 . Nozzle 2. Trigger gun
2. Pour the detergent into the tank and install it to the
nozzle.
► 1 . Tank
NOTICE:
Always use neutral detergent. Acidic or
alkaline detergent may damage the tank or nozzle.

OPERATION

WARNING:
Do not touch the water jet or
direct the it toward yourself or others. The water
jet is dangerous and can hurt you or others.
WARNING:
When shooting the water jet,
never hold the object that you are cleaning or
place your hands and feet near the water jet.
CAUTION:
Stay alert to the rebound of the
water jet and blown objects. Do not bring the
nozzle closer than 30 cm .
CAUTION:
Do not run the high pressure
washer without water for longer than 1 minute.
CAUTION:
Do not operate the high pressure
washer for a extended period of time. This may
cause overheating or ire. Also, long-term use may
cause vibration disorder.
CAUTION:
Be aware of the direction of the
wind. If the detergent gets into your eyes or mouth,
rinse with fresh water immediately and seek medical
attention if necessary.
NOTICE:
for longer than 1 hour. After using 1 hour, leave a
same length of intermission.
1.
2
trigger gun. For the HW1200, connect the other end to
the high pressure washer. For the HW1300, unreel the
hose all the way to the end.
2.
and then open the faucet.
NOTICE:
pressure washer, do not use water hotter than
40°C.
3.
1
switch it on.
► 1 . Power switch
4.
squeeze the trigger. The jet continues as long as the
trigger is squeezed.
► 1 . Stopper
10 ENGLISH
Avoid using the high pressure washer
Connect the end of the high-pressure hose to the
Connect the high pressure washer to the faucet
To protect the mechanism of the high
Plug the high pressure washer into the mains and
To eject a water jet, unlock the stopper and
1
1