Maintenance And Storage; Cleaning The Nozzle; Cleaning The Filter - Makita DHW080 Instruction Manual

4. Squeeze the trigger until the remaining water in
the high pressure washer is discharged.
NOTICE:
Do not run the motor for longer than 1
minute.
5.
Switch off the high pressure washer and remove
the battery cartridges.
1
► 1. Power switch 2. Battery cartridge
6. Disconnect the high-pressure hose from the trig-
ger gun and the high pressure washer.
1
2
► 1. Trigger gun 2. High-pressure hose 3. High-
pressure washer
NOTICE:
To prevent the high-pressure hose from
being damaged, remove the remaining water in
the hose before storing.
MAINTENANCE &
STORAGE
switched off and battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Cleaning the nozzle

Use the cleaner pin to remove dirt from or unclog the
nozzle.
2
► 1. Cleaner pin
NOTICE:
This may result in personal injury or damage to the
ejection hole causing deviated jet angles or poor
performance.

Cleaning the filter

Detach the water hose connector and remove dirt and
debris from the inside of the filter.
3
2
► 1. Water hose connector 2. Filter 3. Sealing ring
17 ENGLISH
CAUTION:
Always be sure that the tool is
Never use gasoline, benzine, thinner,
1
Do not remove dirt or debris forcibly.
1
2 3