Preliminary
Appendix A—AP Web Server
Introduction
You can configure the AP through a web browser interface to the AP web server. The
web server resides in the AP and is accessible from any STA that is connected to the AP
Infrastructure network.
Accessing the AP Web Server
To access the AP web server, use the IP address of the AP as the URL address, for
example http://192.168.1.1. The web server home page contains several hyperlinks that
provide viewing of the system information, status of the AP and associated stations, and
configuration parameters of the AP. On the initial entry into the AP web server (click on
hyperlink) a popup window appears prompting for a username and password. Enter the
username and password, and click "OK" to enter the AP web server.
If you want to receive warning messages when configuring the AP, enable JavaScript on
the web browser. Otherwise, no warnings are issued.
Access Point User's Guide • Page 16