Table of Contents
Advertisement
Preliminary
Setup
Click the Setup hyperlink from the AP Web Server home page to change AP
configuration parameters. This page displays the current configuration of the AP. If you
modify the configuration parameters, you must click Apply to save the changes. The new
configuration is not in effect until you reboot the AP. Click Reboot to reboot the AP. The
web browser loses connectivity with the AP web server as the AP reboots. To establish a
network connection to the rebooted AP, wait until the AP has completed rebooting, and
then navigate to the web server home page (by clicking the Home hyperlink) to resume
communication with the AP web server.
Access Point User's Guide • Page 18
Advertisement
Table of Contents
