Cisco 10008 Installation And Configuration Manual page 60

show pxf cpu qos
show pxf cpu qos
To display Parallel eXpress Forwarding (PXF) External Column Memory (XCM) contents related to a
particular policy, use the show pxf cpu qos command in privileged EXEC mode.
Cisco 10000 Series Router
Syntax Description 0–65535
classifiers
flex-sum
policy-map
policy-name
tcam
vcci-maps
Command Modes
Privileged EXEC
Command History Release
12.2S
12.3(7)XI1
12.2(28)SB
12.2(31)SB2
12.2(33)SB
Usage Guidelines
This command is useful in verifying the presence of a policy on interfaces and indexes programmed in
the PXF.
Examples
The following example shows XCM contents related to a policy called police_test, which is defined as
follows:
policy-map police_test
class high-priority
Cisco 10008 Router PRE4 Installation and Configuration Guide
60
show pxf cpu qos [policy-map policy-name | vcci]
show pxf cpu qos [0–65535 | classifiers | flex-sum | policy-map policy-name | tcam | vcci-maps]
(Optional) Displays information for the Virtual Channel Circuit Identifier
(VCCI) you specify.
(Optional) Displays information about the criteria used to classify traffic.
(Optional) Displays summary information describing the amount of memory
allocated in the PXF engine for use by the flexible key construction
microcode.
Note
(Optional) Displays per-policy map information.
Displays PXF QoS ACL statistics.
(Optional) Displays VCCI map values.
Modification
This command was introduced.
This command was introduced on the Cisco 10000 series router for the
PRE2.
This command was integrated into Cisco IOS Release 12.2(28)SB.
This command was introduced on the PRE3 for the Cisco 10000 series
router.
This command was introduced on the PRE4 for the Cisco 10000 series
router.
This option is only available on the Cisco 10000 series router for the
PRE3 and PRE4.
OL-13840-01