Cisco 10008 Installation And Configuration Manual page 53

7
Table 10, Part 2
Table 10, Part 2
Field
Block
Use
Rows
Columns
Memory used
The following sample output describes the information displayed in the next section of the command
output from the show pxf cpu access-lists security command. There are 16 banks of XCM in each PXF
column. This output section shows the usage level of each bank.
Banknum
0
1
2
3
4
5
6
7
8
9
Table 10, Part 3
Table 10, Part 3
Field
Banknum
Heapsize
Freesize
%Free
OL-13840-01
TCP Flags/Fragment
describes the significant fields shown in the display.
show pxf cpu access-lists security Field Descriptions
Heapsize Freesize
4718592 4702208
8126464 6012928
8388608 6290432
8388608 6290432
5898240 5881856
8126464 6012928
8388608 6290432
8126464 6012928
4456448 4440064
8126464 6012928
describes the significant fields shown in the display.
show pxf cpu access-lists security Field Descriptions
1/128 1/32 16384
Description
Indicates the block number.
Describes the IP packet field that is being matched.
An indication of where the largest variety of values are in use
in the ACLs that are being applied. In the output, 12/128
means that there are 12 different values of significance in the
field. If there are other rules added and the value exceeds 128,
more memory will be needed to accommodate the new rules.
An indication of the number of TurboACLs in PXF memory.
In the output, 1/32 means there is only one TurboACL in PXF
memory. If there are more than 31 added, another chunk of
memory is needed to accommodate the new ACLs.
Displays the total amount of memory used for this particular
lookup table.
%Free
99
73
74
74
99
73
74
73
99
73
Description
The block of memory used for this particular lookup table.
The total amount of memory, in bytes, allocated for this
block.
The amount of memory, in bytes, that is currently available
for use by this block of memory.
The percentage of memory that is free and available for use for
this block of memory. When the %Free drops to 0, the router
cannot hold any more ACLs in PXF memory, and any new
ACL will not pass traffic.
Cisco 10008 Router PRE4 Installation and Configuration Guide
show pxf cpu access-lists
53