Table 17 Repeater Network Settings For Manual Mesh - Honeywell OW-CDX050 User Manual

Table 17 Repeater network settings for Manual Mesh

Screen and Option
Wireless Mesh - General screen
Mesh mode:
Signal Strength LED
MAC:
Spanning Tree
Protocol (STP)
802.1d:
Wireless Mesh - Radio screen
Wireless Mode:
Tx Rate:
Channel No.:
Tx Power Mode:
Propagation Distance:
RTS Threshold:
Beacon Interval:
Wireless Mesh - Encryption screen
Mesh encryption
options
Screen and Option
Wireless Mesh - General screen
Mesh mode:
SSID
R110
6/08
Multinode 1
Manual Mesh
Not assigned (select
from drop-down list)
Enable (or Disable if no
mesh loop possible)
802.11a
AUTO
Must be the same as
Multinode 2
Auto
< 5 Miles
2346
100
Must be the same as
other two multinodes
Table 18 Repeater network setting for Auto Mesh
Multinode 1
Auto Mesh selected
Must be the same as
Multinode 2
OneWireless Multinode User's Guide
Wireless Mesh Configuration
Setting up wireless networks
Multinode 2
Manual Mesh
Not Assigned (select
from drop-down list)
Enable (or Disable if no
mesh loop possible)
802.11a
AUTO
Must be the same as
Multinode 1
Auto
< 5 Miles
2346
100
Must be the same as
other two multinodes
Multinode 2
Auto Mesh selected
Must be the same as
Multinode 1
Multinode 3
Manual Mesh
Not Assigned (select
from drop-down list)
Enable (or Disable if no
mesh loop possible)
802.11a
AUTO
Must be the same as
Multinode 1
Auto
< 5 Miles
2346
100
Must be the same as
other two multinodes
Multinode 3
Auto Mesh selected
Must be the same as
Multinode 1
95