Table of Contents
Advertisement
Step
5
Verify that you receive a message on the authentication device indicating
the multinode received the security key successfully.
If you receive a message indicating that key deployment was not
successful, repeat the procedure from step 1.
6
Select Read Device Information to determine if the multinode acquired a
network address from the wireless directory server. A valid address should
start with 0xEF or similar. (0x0000 indicates the multinode did not acquire a
valid IP address.)
TIP
After the multinode has been injected with an authentication key and
authenticated by the Key Server, you can look at the event log on the Key
Server.
•
R110
6/08
Select Start > Programs > Honeywell OneWireless >
KeyServerManager, and then click Event Log.
OneWireless Multinode User's Guide
Installation Overview
Authenticating a multinode/WSG
Action
33
Advertisement
Table of Contents
