Purpose And Content; Ce Conformity - Honeywell OW-CDX050 User Manual

Addendum
OneWireless Multinode - Models WNMN and WNMS
The Honeywell WNMF and WNMS OneWireless multinodes are now ATEX certified,
and all units manufactured currently and in the future will include labeling that includes
all markings required under the ATEX directive.

Purpose and Content

This adendum includes information relative to both the Factory Mutual Approval and
Canadian Standards Association Certification and as required under the ATEX Directive
regarding:
1. The appearance and meaning of each certification mark (CE Mark) that appears on
the label(s) affixed to the product.
2. Instructions for installation and use of the product within potentially explosive
atmospheres.
Information required for use of this product, and additional installation information, is
included in:
OW-CDX050 - OneWireless Multinode User's Guide
of which this adendum is a part.
Details regarding certification marks that appear in labeling for this product are given in
this addendum.
ATTENTION
The publications cited above and the functioning and construction (except for
labeling) of the devices described therein are essentially unchanged. The
purpose of this addendum is to provide details the purpose and appearance
of the labels attached to each device under ATEX Directive 94/6/EC.
ATTENTION
Before installing the equipment in a potentially explosive atmosphere, please
read the information provided in this addendum, which supports the ATEX
certifications for this product.

CE Conformity

The Multinode is in conformity with the protection requirements of the following
European Council Directives: 94/9/EC, the Explosive Atmospheres (ATEX) Directive
and 89/336/EEC, the Electromagnetic Compatibility (EMC) Directive and Radio and
Telecommunications Terminal Equipment (RTTE) Directive - 1999/5/EC.
118 OneWireless Multinode User's Guide R110
6/08