Siemens SINUMERIK 840D sl Function Manual page 277

05.08
36903
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Significance:
corresponds with ...
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
$MA_SAFE_CAM_ENABLE
Enable safe cam track
Min. input limit: 0
Protection level: 7/2
30 safe cams can be enabled for one axis/spindle for the "safe cam track" function using
this machine data.
The enable signals may only be issued if the cam enable is not used in $MA_SAFE_FUNC-
TION_ENABLE.
The cam synchronization is automatically activated if the "safe cam track" function is en-
abled.
Bit 0: Enable safe cam track, cam 1
Bit 1: Enable safe cam track, cam 2
Bit 2: Enable safe cam track, cam 3
Bit 3: Enable safe cam track, cam 4
Bit 4: Enable safe cam track, cam 5
Bit 5: Enable safe cam track, cam 6
Bit 6: Enable safe cam track, cam 7
Bit 7: Enable safe cam track, cam 8
Bit 8: Enable safe cam track, cam 9
Bit 9: Enable safe cam track, cam 10
Bit 10: Enable safe cam track, cam 11
Bit 11: Enable safe cam track, cam 12
Bit 12: Enable safe cam track, cam 13
Bit 13: Enable safe cam track, cam 14
Bit 14: Enable safe cam track, cam 15
Bit 15: Enable safe cam track, cam 16
Bit 16: Enable safe cam track, cam 17
Bit 17: Enable safe cam track, cam 18
Bit 18: Enable safe cam track, cam 19
Bit 19: Enable safe cam track, cam 20
Bit 20: Enable safe cam track, cam 21
Bit 21: Enable safe cam track, cam 22
Bit 22: Enable safe cam track, cam 23
Bit 23: Enable safe cam track, cam 24
Bit 24: Enable safe cam track, cam 25
Bit 25: Enable safe cam track, cam 26
Bit 26: Enable safe cam track, cam 27
Bit 27: Enable safe cam track, cam 28
Bit 28: Enable safe cam track, cam 29
Bit 29: Enable safe cam track, cam 30
/FBSI/ see Chapter 6.8: "Safe software cams, safe cam track (SN)"
8.1 Machine data for SINUMERIK 840D sl
Max. input limit: 0x3FFFFFFF
Data Description
Unit: –
8-277