Provider Backbone Bridge Commands
• module: Module number. A physical layer interface module (PLIM) is always 0.
• port: Physical port number of the interface.
Task ID
Task ID
l2vpn
Examples
This example shows how to enter the EVPN Interface configuration mode for bundle-ether 1:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# interface bundle-ether 1
RP/0/RSP0/CPU0:router(config-evpn-ac)#
Related Commands
Command
evpn, on page 400
ethernet-segment, on page 396
mac-flush mvrp, on page 418
timers, on page 458
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Operation
read, write
Description
Enters EVPN configuration mode.
Enters EVPN interface ethernet segment configuration mode.
Performs a MAC flush on an Ethernet-segment.
Configures timers that affect the convergence of PBB EVPN in
failure scenarios.
interface (EVPN)
6.1.x
411