L2Tp Static - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands

l2tp static

To enable the Layer 2 Tunneling Protocol (L2TP) static submode, and perform L2TP pseudowire configurations,
use the l2tp static command in p2p pseudowire configuration submode. To disable the L2TP static submode,
use the no form of this command.
l2tp static [local {cookie {secondary size| size} {0| 4| 8} value value| session session id}| remote {cookie
size {0| 4| 8} value value | session session id}]
no l2tp static [local {cookie{secondary size| size} {0| 4| 8} value cookie value| session session id}| remote
{cookie size {0| 4| 8} value cookie value | session session id}]
Syntax Description
local
cookie
secondary size
size
value
cookie value
session
session id
remote
Command Default
None
Command Modes
p2p pseudowire configuration
Command History
Release
Release 4.3.1
(Optional) Configures local cookies and sessions.
Sets L2TP pseudowire static local or remote cookie.
Sets L2TP pseudowire static local cookie secondary size.
Sets L2TP pseudowire static local cookie size.
Sets the value of the cookie.
Value of the cookie.
The cookie values are specified based on the configured cookie size:
• Cookie size 0—No cookie value is set.
• Cookie size 4—Lower 4 bytes value (<0x0-0xffffffff>) is set.
• Cookie size 8—Lower 4 bytes value and higher 4 bytes values
(<0x0-0xffffffff> <0x0-0xffffffff> ) are set.
Sets L2TP pseudowire static local or remote session.
Session ID. Range is from 1 to 65535.
(Optional) Configures remote cookies and sessions.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced

l2tp static

6.1.x
87