Show Nve Peers - Cisco ASR 9000 Series Reference Manual

show nve peers

show nve peers
To display the network virtualization endpoint (NVE) peers configured on the router, use the show nve peers
command in EXEC mode.
show nve peers [interface nve nve-id| vni vni-id]
Syntax Description
interface nve nve-id
vni vni-id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 5.2.0
Usage Guidelines
The router learns about NVE peers through data plane traffic. Therefore, the show nve peers command output
displays NVE peers only after VXLAN traffic traverses through the router.
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
tunnel
Examples The following shows an example output of the show nve peers command.
RP/0/RSP0/CPU0:router# show nve peers
Interface
nve1
nve2
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
680
Peer-IP VNI
1.1.1.2 1000
1.1.1.3 2000
Displays NVE peers of the specified NVE interface.
Displays NVE peers of the specified VNIs.
Modification
This command was introduced.
Operation
read
Up Time
10h
20h
VXLAN Commands