Show L2Vpn Process Fsm - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands

show l2vpn process fsm

To display the status of the l2vpn process finite state machine, use the show l2vpn process fsm command in
EXEC mode. It displays the current process role and state, NSR status, ISSU status, role change status, and
status of collaborators.
show l2vpn process fsm [location| standby]
Syntax Description
location
standby
Command Default
None
Command Modes
EXEC
Command History
Release
Release 6.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples
The following example displays output for the show l2vpn process fsm command:
RP/0/RSP0/CPU0:router# show l2vpn process fsm
Mon May 16 10:20:30.967 PDT
L2VPN Process FSM
Current process role
Current process state
S/w install in progress
NSR Status:
(Optional) Displays non-stop routing information for the specified location.
(Optional) Displays Standby node specific information.
NSR Ready
Last NSR Withdraw Time
Standby Connected
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operation
read
: Primary Active (Master)
: Run
: No
: No
: Mon May 16 10:19:58 PDT 2016 (00:00:33 ago)
: No
show l2vpn process fsm
6.1.x
191