Maximum (Pvrst) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

maximum (PVRST)

To set the maximum age for the bridge, use the maximum command in PVRST configuration submode. To
undo the setting, use the no form of this command.
maximum age seconds
no maximum age seconds
Syntax Description
age
seconds
Command Default
None
Command Modes
PVRST configuration
Command History
Release
Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples
This example shows how to set the maximum age time for the bridge to 40:
RP/0/RSP0/CPU0:router(config)# spanning-tree pvrst st1
RP/0/RSP0/CPU0:router(config-pvrst)# maximum age 40
Related Commands
Command
forward-delay (PVRST), on page 505
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Specifies the age of the bridge.
Maximum age time for the bridge in seconds. The
range is from 6 to 40.
Modification
This command was introduced.
Operations
read, write
Description
Sets the forward-delay time for the bridge.
maximum (PVRST)
6.1.x
541