Replacing Cisco Asr 9000 Series Router Components; Prerequisites And Preparation - Cisco ASR 9000 Series Installation Manual

Replacing Cisco ASR 9000 Series Router
Components
The router is equipped as ordered and is ready for installation and startup when it is shipped. As network
requirements change, you may need to upgrade the system by adding or changing components. This chapter
describes how to maintain router components.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Prerequisites and Preparation

Before you perform any of the procedures in this chapter, be sure that you:
• Review the
• Read the safety and ESD-prevention guidelines described in
• Ensure that you have all the necessary tools and equipment before beginning the procedure.
Have access to the safety and compliance document during the installation, see:
http://www.cisco.com/en/US/docs/routers/asr9000/hardware/rcsi/regulatory/compliance/asr9krcsi.html
Prerequisites and Preparation, on page 221
Replacing the Chassis Air Filter, on page 224
Removing and Replacing the Fan Trays, on page 230
Removing and Replacing Power System Components, on page 232
Removing and Replacing Cards from the Chassis, on page 245
Migrating from RP1 to RP2 Card, on page 248
Migrating from RP2 to RP3 Card, on page 250
Migrating from RSP440 to RSP880 or RSP880-LT Card , on page 253
Migrating from RSP4-S to RSP880-LT Card (ASR 9906 Router), on page 256
Migrating from RSP4/RSP4-S/RSP-L to RSP5 Card, on page 258
Migrating from FC1 to FC2 Card, on page 261
Migrating from A99-SFC2 to A99-SFC3 Card, on page 262
Migrating from A99-SFC-S/A99-SFC-T to A99-SFC3-S/A99-SFC3-T Card, on page 262
Removing a Chassis from the Equipment Rack, on page 263
Installing a Replacement Chassis in the Equipment Rack, on page 264
Packing a Chassis for Shipment, on page 265
Safety Guidelines, on page
page 2.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
C H A P T E R
1.
Compliance and Safety Information, on
5
221