Philips VL3000 Service Manual page 59

Step 19. Finish by performing steps 2 through 4 in the removal section in reverse order.
Note: To prevent binding, thread edge screw all the way into linear actuator motor before re-
installing. Secure right-side optic assembly clamps first when re-installing.
02.96 78.001 0 G
M P
AINTENANCE ROCEDURES
Top Head Cover
Fan
Guide Rod
Figure 2-22: VL3000 Spot Optic Assembly Replacement
: S O A
POT PTIC SSEMBLY
Spot Optic Assembly
Linear Actuator
Motor (see detail)
Edge
Screw
Clamp
(Secure this side first when reinstalling.)
Edge Screw
Thread all the way into motor
as shown before re-installing.
R
EPLACEMENT
Optic Assembly Side View
Motor
2
41