Strobe Assembly Replacement - Philips VL3000 Service Manual

❋
VARI LITE® - VL3000™ & VL3000™Q S

Strobe Assembly Replacement

VL Part No: 22.9678.0403
VL Part No: 22.9678.0453 (Q Version)
Repair/Replacement Procedure
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. Remove top head cover by loosening four 1/4 turn captive stud connectors.
Step 3. Remove Color/Dimmer/Strobe Assembly.
page 25.
Step 4. Disconnect wiring from strobe motors.
Step 5. Cut wire tie holding wiring harness to strobe assembly.
Step 6. Remove four 6-32 KEPS nuts and lift strobe assembly straight up.
Step 7. Replace assembly by performing steps 2 through 6 in reverse order.
26
ERVICE
Figure 2-8: VL3000 Color/Dimmer/Strobe Assembly Replacement
M
ANUAL
See "Color/Dimmer/Strobe Assembly" on
Top Head Cover
Color/Dimmer/Strobe Assembly
Clamp
02.96 78.001 0 G