Table of Contents
Advertisement
Perform a DNS Lookup
A DNS (Domain Name Server) converts the Internet name (e.g. www.netgear.com) to an IP
address. If you need the IP address of a Web, FTP, Mail or other Server on the Internet, you can
do a DNS lookup to fing the IP address.
Display the Routing Table
This operation will display the internal routing table. This information is used by Technical Support
and other staff who understand Routing Tables.
Reboot the Router
Use this button to perform a remote reboot (restart). You can use this if the Router seems to have
become unstable or is not operating normally.
Note Rebooting will break any existing connections either to the Router (such as this one) or
through the Router (for example, LAN users accessing the Internet). However, connections to the
Internet will automatically be re-established when possible.
CPU Utilization
The CPU usage while Voice and Data traffic is flowing through the router can be measured using
XCYCLE utility as follows.
On the Console,
go to /mnt/cramfs
Insmod hrdbr.o
./xcycle
The CPU utilization will be displayed.
© NetgearInc. 2004
All Rights Reserved
Page 27 of 36
Advertisement
Table of Contents
