Table of Contents
Advertisement
Timezone
The Router will determine the current time and date by contacting a Network Time (NTP) Server
on the Internet. In order to display your local time, you must select your Time Zone from the list.
If your region uses Daylight Savings Time, you must manually check Adjust for Daylight Savings
Time at the beginning of the adjustment period, and uncheck it at the end of the Daylight Savings
period.
Use this NTP Server
If you prefer to use a particular NTP server as the primary server, check the checkbox Use this
NTP Server and enter the Server's IP address under Use this NTP Server.
If this setting is not enabled, the default NTP Servers are used.
To Accept Or Cancel
Click Apply to save changes.
Click Cancel to disregard any unsaved changes.
3.2.7 E-mail
Your router can periodically email you the system log. (On the Logs screen, you can choose what
events are to be included in the log.) The router can also send an immediate alerts when it detects
a significant security incident such as
© NetgearInc. 2004
All Rights Reserved
Page 20 of 36
Advertisement
Table of Contents
