Table of Contents
Advertisement
Service Definition
This section displays data for the current Service, and allows you to enter data to create a new
rule.
Name
Enter a suitable name for this Service.
Type
Select the correct type for this Service.
Start Port
Enter the beginning of the required port range here, and the end of the range in the "Finish Port"
field. If only a single port is required, enter the same number in both "Start" and "Finish" fields.
Finish Port
Enter the end of the requried port range here. If only a single port is required, enter the same
number in both "Start" and "Finish" fields.
3.2.6 Schedule
If you have set Firewall Rules on the "Rules" screen or Keyword Filtering on the "Block Sites"
screen, you can set up a schedule for when the rules are applied.
To apply Rules based on a schedule:
1. On the "Rules" screen, create the required Rules, using either "Block by Schedule" or
"Allow by Schedule" for each rule, as required.
2. Select the Use this schedule for rules checkbox on this screen.
3. Select the days and times on this screen, as required.
4. Click Apply.
Note: If the schedule is disabled on this screen, this affects ALL Rules which are using a schedule.
© NetgearInc. 2004
All Rights Reserved
Page 18 of 36
Advertisement
Table of Contents
