Table of Contents
Advertisement
• Local activity - If checked, this will log connections to this Router, rather than through this
Router to the Internet.
• All incoming and Outgoing traffic - All incoming and outgoing connections are logged.
Checking this will generate a large number of log entries, and is only recommended if using
a Syslog server.
Syslog
Enable one of these three options, as required:
• Disable - Select this if you don't have a Syslog server.
• Broadcast on LAN - the Syslog data is broadcast, rather than sent to a specific Syslog server.
Use this if you Syslog Server does not have a fixed IP address.
• Send to this Syslog server IP address - If your Syslog server has a fixed IP address, select
this option, and enter the IP address of your Syslog server.
3.2.3 Block sites
If you want to prevent access to certain sites on the Internet, you can use the router's content
filtering feature. You can specify up to 32 words that, should they appear in the website name
(URL) or newsgroup name, will cause the site to be blocked by the router. When users try to
access a blocked site, they will get a message: "Blocked by NETGEAR".
© NetgearInc. 2004
All Rights Reserved
Page 12 of 36
Advertisement
Table of Contents
